Product Filter

Tools & Accessories:
PlugsCablesVelcro StrapsToolsElectronicsRC Case
Sorted:
  • E-Design ES121 Motion Control Screwdriver
    E-Design ES121 Motion Control Screwdriver

    ES121 is the upgraded version of ES120. It is equipped with 1:64 reduction gear motor(ES120 is 1:144) ensure larger rotation speed up to 380 RPM load-free(ES120 is 170RPM) .Slim 304 stainless steel housing with pen shape design,powered by 300mAh lipo battery with 30 minutes working time continuously at full load. It is equipped with SMT32 MCU and 3-axis gyro supporting motion control enable the user to screw or unscrew just by a thumb slight moment, so intelligent and convenient. 16X96mm OLED display the working status and standard 4mm diameter socket compatible most most precision screwdriver bits.Come alone with 14pcs orgingal screwdriver bits includes PH0,PH2,SL1.5,SL3.0,SL4.0,H1.5,H.0(ES-B7 common type),PH000,T4,T6,T8,T10,P2,P5(ES-A7 type)and portable pouch easy to store and carry, a great helper for electronic reparing projects. Smart Functions: -Battery low voltage reminder, low voltage protection mode;-User ustomized configuration parameters (such as torsion, torque, etc);-Open source application layer.Parameter Setting:1/ Press the button 3 times to enter the "setting", Wait without any action or long press to ture off "setting".2/ A model is automatic 3/ 1-4 model corresponds to 4 kinds of torque, and torque decreases progressively.Configuration file settings: When the screwdriver is turned off, connect it with USB data cable to your PC ro laptop, then press the button, then the computer will recognize it. Open the config.txt file in the U disk,the content is:StartAngle=2 #(2~10)Gear=4 #(0~4)MotoTimeCont=0 #ReadOnlyVer=1.1 #ReadOnlyThen you can change your setting.Specification:

    Review: Write a Review

    $110.00 $89.10, Save 19% OFF

    SKU:ES121

    Weight: 0.45 kg

  • CNC Aluminium Alloy Monitor Mount Bracket For Transmitters
    CNC Aluminium Alloy Monitor Mount Bracket For Transmitters

    CNC Alloy FPV LCD Monitor Mounting Bracket with universal design that compatible with most transmitters. Aluminum alloy material with gravity regulator to adjust gravity center. Easy to install, light weight and high strength. Except the FPV monitors, you can also install Dragonfly Diversity Receiver on it.

    Review: Write a Review

    $4.99 $4.39, Save 12% OFF

    SKU:RCQIB

    Weight: 0.15 kg

  • TS100 65W Digital OLED Programmable Soldering Iron Station B2 Kit
    TS100 65W Digital OLED Programmable Soldering Iron Station B2 Kit

    TS100 mini iron station is an internal heating intelligent CNC soldering iron, lightweight design, easy to assemble or disassemble and storage, comfortable handle, highly effective heating element and simple control interface, is indispensable tools for electronic worker !~Work between DC12-24V, with OLED screen, temperature adjustment buttons, external power independently, up to 300 ℃ just need as low as 10 sec. Features: * Based on 304 stainless steel nested polycarbonate housing, integration of safety circuit design power supply interface, anti-static structure, embedded STM32 processor chip, dual temperature sensor and acceleration extreme cooperate, TS100 intelligent temperature control between 100-400 degrees, instantaneous heating, automatic dormancy, overtemperature alarm, and other functions.* External independent power supply : DC5525 power interface, suitable for notebook DC12-24V power supply, car power and mobile power supply.* Micro USB interface: Through edit the parameter file, custom your own temperature curve and buttons function.* Additional features: Open source for writting your own App.

    Review: Write a Review

    $51.00 $47.94, Save 6% OFF

    SKU:TS100

    Weight: 0.30 kg

  • EZlap Timing System
    EZlap Timing System

    X-Racer X-1 Racing with EZlap Timing System The EZlap timing system is a race management system that specially designed for both indoor and outdoor small scale drone racing. This new FPV race tracker allows 4 pilots to race at once. The EZlap timing system comes with a master controller, 3 infrared receiver modules, 8 transmitters. The system is powered by a PC or laptop via a USB cable connecting to the USB port of master controller. It is easy to install, simply mount the master controller and receiver modules in the racing gate, install the transmitters in the racing drones, then install the free RCM Beginner software (can be downloaded at the bottom of this page) in your computer and connect with the provided USB cable, you and your friends will be able to start the racing just in a minute.The master controller sends the signals that received from the infrared receiver modules to the computer after processing.The infrared transmitter is 0.4g only, it will not increase any weight to the racing drone since it is so light in weight. It has 8 different address codes which are switchable via the 3-digit DIP switch. Start to send the address codes after powering on via USB.The infrared receiver modules receive the address codes from the transmitters and send them to master controller.Connection and Use:The master controller is powered by the USB after connecting to the PC. No extra power supplies required.The receiver modules and master controller are connected with three special made 6-pin plug cables. In the EZlap timing kit there are 4 receiver modules (including the master controller) included. But how many modules you need depending on your track width and the height of your bridge. The quantity of receiver modules is also limited by the USB loading capacity.The infrared transmitter is powered by the built-in button cell battery.Connect the master controller to the PC with the provided USB cable, access to the free RCM Beginners software and set the pilots information.Package Inlcuded:Master controller x 1 (similar to receiver module but with a USB port)Receiver module x 3 Transmitter for racing quad x 816cm 6-pin plug camble x 33m long USB cable x 1Downloads:RCM Beginners (Free Software)RCM Beginners User ManualThe master controller is powered by the USB after connecting to the PC. No extra power supplies required. It sends the signals that received from the receiver modules to the RCM Beginners software after processing.The receiver modules are connected by 6-pin plug cables. They receive the address codes from the transmitters and send them to master controller.The infrared transmitter is 0.4g only, it will not increase any weight to the racing quad since it is so light in weight . It has 8 different address codes which are switchable via the 3-digit DIP switch. Start to send the address codes after powering on via USB.Three 16cm 6-pin plug cables are included to connect the receiver modules and master controller.The 3m USB cable is used for connecting the master controller to the PC. All the parts included in the EZlap timing system.Management interface of RCM Beginners.The EZlap timing system is working during the racing.

    Review: Write a Review

    $139.00 $111.20, Save 20% OFF

    SKU:FCTR

    Weight: 0.25 kg

  • Matek FCHUB-6S W/ CURRENT SENSOR 184A  BEC 5V & 10V
    Matek FCHUB-6S W/ CURRENT SENSOR 184A BEC 5V & 10V

    The Matek FCHUB-6S PDB distributes power from a 3~6S LiPo pack to 4 ESCs, as well as providing regulated & filtered DC 5V & DC 10V outputs for powering Cameras, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It also has built-in 184A current Sensor, and offers a FFC socket to connect the MATEKSYS Flight Controller conveniently.Features:Total 4 pairs ESC solder tabs are fit for X type frameMax.27V input w/ TVS protectionBuilt-in current sensor 184APDB: 4*30A (4*46A, 5 seconds), 4layers*2oz copper PCBBEC 5V/1.5A(2A Max) w/ 100uF panasonic POSCAP filterBEC 10V/1.5A(2A Max.) w/ 47uF TDK MLCC filter5V & 10V Output LED indicators & Short circuit tolerant

    Review: Write a Review

    $9.60 $7.10, Save 26% OFF

    SKU:FCHUB-6S

    Weight: 0.10 kg

  • Matek FC Vibration Damping M3 Standoff
    Matek FC Vibration Damping M3 Standoff

    Matek M3 vibration damping standoffs help to reduce vibrations on your camera or flight controller.Includes:- 4pcs M3*7*4.5 mm Rubber Vibration Damping Standoffs

    Review: Write a Review

    $2.79

    SKU:MKVDS

    Weight: 0.10 kg

  • Orignal Amass XT30 Plug Connectors Male/Female One Pair
    Orignal Amass XT30 Plug Connectors Male/Female One Pair

    Specification:Brand Name: AmassItem Name: XT30Quantity: 1 male & 1 femaleBody Material: Copper and gold platedInternal Material: Nylon/PAMax. RC/MC: 20A/30ATemperature Resistance: -20°C ~ 120°CConnector: 2mm Bullet TypeWeight: 1.8g/PairWire: 16-20AWGIncludes:Pair Amass XT30 Connector Male & Female

    Review: Write a Review

    $0.89

    SKU:AMSXT30P

    Weight: 0.10 kg

  • 60-core Large Current Y Servo Extension Cord With Anti-Interference Magnetic Ring 30cm/60cm
    60-core Large Current Y Servo Extension Cord With Anti-Interference Magnetic Ring 30cm/60cm

    specially designed for uav FPV,flexible and good quality,with the magnetic ring you can minimize the interference,make suer your flight safety.Length: 60cm,30cmConnector: compatible with Futaba & JRQuantity: 1 pcs

    Review: Write a Review

    $4.49 $4.22, Save 6% OFF

    SKU:YSEWMR30

    Weight: 0.10 kg

  • XT60 Male To Two DC 5.5mm Plug Connecting Wire
    XT60 Male To Two DC 5.5mm Plug Connecting Wire

    Quality power supply conversion cable.Suitable for receiver or monitor to connect with LI-PO battery.

    Review: Write a Review

    $3.99 $3.67, Save 8% OFF

    SKU:XTDC55

    Weight: 0.10 kg

  • XDRC external BEC 3A 5V Input 2-6 Lipo UBEC
    XDRC external BEC 3A 5V Input 2-6 Lipo UBEC

    This UBEC is an external voltage stabilizer, it works at the Switch Mode. And compared with the linear regulator BEC, the advantages mainly reflected in: When using the 3 pack (11.1V) or more batteries, can greatly reduce the BEC fever , and increase overall efficiency.Specifications:-Output voltage: 5V/3A -Input voltage: 5.5‐21V (2—5 cells Lipo battery pack)-Ripple: <50mVp‐p (@2A/12V)-Size: 26mm*12mm*11mm (L*W*H)-Weight: 5gFeatures: 1.1: Designed with an advanced switching power supply control chip with overcurrent and overheat protection function, the max efficiency of the chip is up to 92%.1.2: The small size and the light weight make it very convenient to use.1.3: Provide large output current, fully guarantee the power demand of equipment.1.4: Designed with a high quality switching power supply conversion chip, significantly reduce the electromagnetic interference and ensure the receiver works properly.

    Review: Write a Review

    $6.39 $4.98, Save 22% OFF

    SKU:XDRC

    Weight: 0.10 kg

  • Matek  WS2812B RGB 5050 LED Board for FPV RC Multicopter
    Matek WS2812B RGB 5050 LED Board for FPV RC Multicopter

    Specifications:- Power supply voltage: +3.5~+5.3 V- Input voltage: -0.5~+0.5 V- Operation junction temperature:-25~+80 ℃- Storage temperature range:-55~+150 ℃- Can be used for NAZE 32- Size: 51mm*10mmApplications- Naze 32 LED Strip with CleanFlight, AVR, Arduino, PIC, mbed, etcNote : only the LED board

    Review: Write a Review

    $4.90 $3.43, Save 30% OFF

    SKU:WS2812B

    Weight: 0.05 kg

  • 12 in 1 Wireless RC Simulator PHoenix RC 4.0/RealFlight G5 G4/VRC/Reflex XTR/AeroFly/FMS
    12 in 1 Wireless RC Simulator PHoenix RC 4.0/RealFlight G5 G4/VRC/Reflex XTR/AeroFly/FMS

    Support the following software:- RealFlight G3 /G4 /G5- PhoenixRC v1.0, v2.0, v3.0 (Automatically update)- PhoenixRC v4.0.k (Only for Windows 7)- Reflex XTR v5.03- AeroFly Professional Deluxe v1.9Specifications:- Color: Red.- Weight: 9g.- Support USB HID1.1 /2.0.Package Included:-  Wireless USB dongle-  USB extension cable-  Audio cable (3.5mm jack to jack plug)-  Servo cable-  DVD discs

    Review: Write a Review

    $15.80 $14.38, Save 9% OFF

    SKU:WLFSL

    Weight: 0.20 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.