Sorted:
  • ZMR-X210 V1.1 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit
    ZMR-X210 V1.1 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit

    FPVModel ZMR-X210 Detailed Build by Mr. Joshua Bardwell"ZMR-X210 FPV & Motorcross" by Titan Chan, FPVModel Sponsored PilotThe ZMR-X210 is an evolution of the ZMR design, in keeping up with the changing times this ZMR was re-worked from the ground up. We are not just modifying the arms to give a "X" type of layout, we have re-worked it entirely to provide what the modern user wants. This frame features aluminum mounting hardware that allows for faster arm changes. This frame also gives the user options for weight saving. By using a single bottom plate the user can opt for weight savings by leaving out the 4mm spacers and "2nd" bottom plate. (This saves weight by eliminating the use of one plate and 8 4mm spacers.) The weight savings can be crutial in times of attending races but the arms being sandwiched between two plates and using the 4mm spacers allows for exceptional strengh improvement too. The choice is up to the pilot...save the weight in times of racing or use both plates when flying free-style and expecting to crash frequently and desire strenth over a few grams of weight savings. Featuring an X design made popular by the likes of Alien and QAVraceblade/R this quad is sure to help keep the center of gravity where you want it, in the center.The ZMR-X210 ARF packages are also available for your easy setup.Includes:1x ZMR-X210 Carbon Fiber Frame4x 4mm Carbon Fiber Arms 1X camera mount for Foxeer Arrow V2 HS1190 and the cameras in similar size (26mm)1x Board Camera Mount 1x Set of Steel screws, aluminum mounting hardware, and standoffs 2x FPVModel velco strap1x 1.5mm top plate 2x 2mm lower platesWeight: 174 grams (Frame and hardware totally ) Updated on May 18th, 2016: The ZMR-X210 has been upgraded to Version V1.1.

    Review: Write a Review

    $45.99 $37.71, Save 18% OFF

    SKU:ZMR210VP

    Weight: 0.50 kg

  • E-Design ES121 Motion Control Screwdriver
    E-Design ES121 Motion Control Screwdriver

    ES121 is the upgraded version of ES120. It is equipped with 1:64 reduction gear motor(ES120 is 1:144) ensure larger rotation speed up to 380 RPM load-free(ES120 is 170RPM) .Slim 304 stainless steel housing with pen shape design,powered by 300mAh lipo battery with 30 minutes working time continuously at full load. It is equipped with SMT32 MCU and 3-axis gyro supporting motion control enable the user to screw or unscrew just by a thumb slight moment, so intelligent and convenient. 16X96mm OLED display the working status and standard 4mm diameter socket compatible most most precision screwdriver bits.Come alone with 14pcs orgingal screwdriver bits includes PH0,PH2,SL1.5,SL3.0,SL4.0,H1.5,H.0(ES-B7 common type),PH000,T4,T6,T8,T10,P2,P5(ES-A7 type)and portable pouch easy to store and carry, a great helper for electronic reparing projects. Smart Functions: -Battery low voltage reminder, low voltage protection mode;-User ustomized configuration parameters (such as torsion, torque, etc);-Open source application layer.Parameter Setting:1/ Press the button 3 times to enter the "setting", Wait without any action or long press to ture off "setting".2/ A model is automatic 3/ 1-4 model corresponds to 4 kinds of torque, and torque decreases progressively.Configuration file settings: When the screwdriver is turned off, connect it with USB data cable to your PC ro laptop, then press the button, then the computer will recognize it. Open the config.txt file in the U disk,the content is:StartAngle=2 #(2~10)Gear=4 #(0~4)MotoTimeCont=0 #ReadOnlyVer=1.1 #ReadOnlyThen you can change your setting.Specification:

    Review: Write a Review

    $110.00 $89.10, Save 19% OFF

    SKU:ES121

    Weight: 0.45 kg

  • RaceFlight Revolt Flight Controller V3
    RaceFlight Revolt Flight Controller V3

    The RaceFlight Revolt flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.PerformanceThe Revolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. Our filters along with the integrated RaceFlight Gummies, allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past. Our boards come preloaded with software and defaults that should fly amazing for 99% of people.In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt) and gives you the fastest response time possible as if the quad can read your mind.Setup SimplicitySetting up the Revolt is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest, you can put the Revolt in upside down and backwards just solder to the closest motor pad and the RF1 wizards will handle the rest. . The Millivolt also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.Zadig and other complicated driver configuration tools are a thing of the past with the Revolt’s new driverless installation technology. Tired of messing around with Zadig or DFU to your software? We were too, that’s why you no longer have to worry about messing around with them. The Revolt also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.FeaturesLED Driver for WS2812b programmable LEDSBUS InversionHigh Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever usedThrough hole solder pads – forms an I-Beam when soldered for extra strengthFrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio supportIntegrated buzzer driverVoltage and current ADC pins, for full voltage and current monitoringFull telemetry output supportESC flashing and configuration built into configuratorMost active software developmentSelectable 3.3 voltage3 serial uartsBluetooth expandableF4 processor16mb of flash memoryGPS expandablePins into RaceFlight Bolt 4in1 ESCDimensions: 36mm x 36mmMounting holes: 30.5mm squared to center of holesWeight: 6 gramsEasily connectable to the RaceFlight Bolt with our special connector.The RaceFlight GuaranteeRevolters will also get access to RaceFlight’s ticketed tech support which will include step-by-step help with installation, tuning, and anything else that may arise with your Revolt.

    Review: Write a Review

    $41.88 $34.34, Save 18% OFF

    SKU:RFRV3FC

    Weight: 0.10 kg

  • Aomway 5.8G 500mW A/V Transmitter  for FPV (fatshark compatible)
    Aomway 5.8G 500mW A/V Transmitter for FPV (fatshark compatible)

     Features:New 5.8G 500mw Vtx/rx from aomway,the latest 5.8G receiver with 32 frequency point, cover almost all frequency band.The lightest 500mW  AV transmitter in the market, only 17g. With 3.5dbi omni directional antenna, improve the AV transmission distance and quality.Fatshark compatible.Transmitter Specifications:- Weight: 17g- Size: 5.5*2.7*0.7cm- Wide voltage input: DC7-16V- Consumption: 12V 220mA 15% fluctuate- Power: 500mW/26.5dBm- Dual frequency point: 5740-5860Mhz(Fatshark)/5705-5946Mhz(common)- 15 transmite channel: CH-1 7/CH-2 8- Audio: Left/Right stereo- Format: PAL/NTSC- Output voltage: 5V-12VDial SMT switch button, choose Fatshark frequency band or common band Receiver features:- 5.8G receiver, 32 frequency point, cover almost all frequency band- Frequencyband and frequency point independant display, aovoid mistake- Upgrade video circuit and sensitivity, with 1W telemetry, could fly 32KMReceiver parameters:- Working Frequency: 5740-5860MHz (Fatshark dedicated ) / 5705-5945MHz ( Universal )5733-5866MHZ/5725-5865MHZ- No DVR function- Wide input voltage : 7V-16V- DC 12V,170mA- 15 transmit channels : CH-1 7channels CH-2 8channels- Sound: about two-channel stereo output- AV Video Output: 2 AV output- Weight : 126g- Size : 80 * 70 * 25mmUpdate on June 6th, 2017: The receivers channel have been upgraded. From 32CH into 48CH.

    Review: Write a Review

    $82.90 $48.08, Save 42% OFF

    SKU:A5G8500TX

    Weight: 0.40 kg

  • CNC Aluminium Alloy Monitor Mount Bracket For Transmitters
    CNC Aluminium Alloy Monitor Mount Bracket For Transmitters

    CNC Alloy FPV LCD Monitor Mounting Bracket with universal design that compatible with most transmitters. Aluminum alloy material with gravity regulator to adjust gravity center. Easy to install, light weight and high strength. Except the FPV monitors, you can also install Dragonfly Diversity Receiver on it.

    Review: Write a Review

    $4.99 $4.39, Save 12% OFF

    SKU:RCQIB

    Weight: 0.15 kg

  • BetaflightF4 Flight Controller
    BetaflightF4 Flight Controller

    BetaflightF4 How to ESC Telemetry, Smart Port Audio, Smart Port TelemetryBetaflightF4 is the follow up design to the very popular BetaflightF3. Following in the same path as Betaflight F3 we have kept a very similar footprint in terms of design with a few added modifications. The F405 has replaced the F303 to allow for lower CPU loads.We have eliminated the 5v/3.3v jumper and added two seperate connection points, one for sbus and one for spektrum users. The jumper still remains for the battery voltage/5v connection for connecting your camera. While wiring the board it is recommended to get power for your vtx either from a different 5v source on the board or if using a higher voltage vtx power it from the battery input coming into the pdb. Running ground loop at Agnd with gnd wires from camera and vtx is still recommended to give the cleanest video signal. Another small design change to this board was changing the BEC, this change takes the recommended 5v 2A current limit and drops it down to 5V 1.5A, its a small change but one that we opted for in order to use a more reliable BEC.BetaflightF4 now comes with telemtry pads for BLHeli32 ESCs these pads are located between the signal and gnd pads for the ESC connections.FeaturesIntegrated PDBBuilt in OSD customizable via Betaflight OSDCurrent sensorIntuitive layoutFlash memory for blackboxTailored to support BetaflightWhen running 8K/8K, CPU usage remains low Download Latest Firmware: Betaflight 3.2.0SpecificationsF405 ProcessorMPU6000 Gyro/ACC SensorBEC Max current 5V 1.5ABuilt in OSD – configurable via Betaflight GUICurrent sensorPower distribution board with six-layer PCBOSD Max Current: 145AWiring Diagram - Click to enlarge!

    Review: Write a Review

    $44.73 $33.99, Save 24% OFF

    SKU:BFF4

    Weight: 0.10 kg

  • Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles Only
    Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles Only

    Skyzone SKY02S V+ 3D 5.8G 40CH FPV Goggles w/ VTX, 3D Camera, Head Tracking, HDMI, DVRThis is the latest version of Skyzone 3D 5.8G 40CH FPV goggles with VTX, 3D Camera, Head Tracking, HDMI and DVR that released in July 2016. Please take note that the option "Goggles Only" includes the goggles only without VTX and 3D camera.The new Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles are an upgrade of previous Skyzone 3D Goggles. These new goggles remain all the features of previous versions, including 3D/2D mode, built-in DVR with playback, head tracking, built-in front camera etc, and add some new features like HDMI-IN, channel auto searching, new eyeshade with headband for a more comfortable wearing.SKY02S V+ FPV goggles are built-in with two 5.8GHz receiving modules, two antenna ports and two independently-working display modules, bringing you 3D FPV flight experience (SCAM302 3D camera and STX202 two-way transmitters required). The two lens of the 3D camera work in the parallel manner so that 3D effect can be enhanced for close shot and reduced for long shot, bringing people an overall vivid visual experience.SKY02S V+ FPV goggles can also work in routine diversity reception mode. In such mode, it displays common 2D images. Its radio channel and band settings may be compatible with STX202 and other 5.8GHz transmitters, and in total it supports bands and 40 channels ( see the Specifications Description for details )These goggles come as an all in one package so you don’t have to worry about purchasing a set of goggles then needing to buy a receiver or even yet a dual diversity receiver system that adds much expense to the overall cost of goggles. These goggles even come with a built in DVR just add a micro SD card and you are good to go. Head Tracking? Yep! It’s included! No need to go out and buy an expensive tracker if that’s what your into. When comparing these goggles to other goggles there’s not much of a comparison. The others are just goggles. Skyzone Sky02S V+ are the whole package! Save some of they money you would spend on building another set of goggles and spend that savings on something that can fly! Features:-3D mode (SCAM302 3D camera and STX202 two-way transmitters required)-2D diversity mode-HDMI in-Channel auto searching-Dedicated eyeshade with headband for more comfortable wearing-Screen OSD-Built-in DVR with playback-Built-in 40CH 5.8G Diversity receiver with raceband, compatible with most FPV 5.8G transmitters on the market (Fatshark,DJI,Walkra,Boscam etc)-Built-in self-calibrating head tracking (gyro, inertial and compass)-Built in dual 854X480(WVGA) monitors, 1,229,760 color sub-pixels-Built-in external camera for surrounding view (640X480,VGA)-AV in/ AV out/ Earphone socket (with volume control)-Adjustable interpupillary and diopter for your eyes-Adjustable brightness and contrast-Complete plug and play kit                

    Review: Write a Review

    $450.99

    SKU:SKY02SS-P

    Weight: 0.90 kg

  • X-Racer X9 Micro Racing Quad DIY Combo
    X-Racer X9 Micro Racing Quad DIY Combo

    Before Purchasing:The X-Racer X9 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The camera in the combos is in PAL version. If you need the NTSC version, please leave message at the checkout, thank you.The DIY version contains the parts that you need to build, but they are not assembled yet. Please note that you will still need to purchase the battery, radio control and transmitter if you do not have them.The DIY combo  do not have the protection cover. If you need the cover pls paid 3 USD via Special Service.Following the X-Racer KL-EX90, FPV Model now has another 2" propeller 90 class micro racer. The ultralight micro racer comes with Runcam Micro Swift CCD camera which is the smallest FPV camera that use 1/3" CCD sensor in FPV community. No more blurry and dull image like youll have on other micro class. You will get the same good quality video on this micro racer like you did with normal Runcam Swift.Micro class FPV racing is more and more popular. Comparing to the regular 5" racing quads, these little stuff have many advantages. You can fly or race with them at anytime any where you like. Because they are so light in weight and so small in size, you do not need to register with FAA if you are from the United States to fly them.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC, you will gain the best performance that you never had before. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. In addition to these, the X9 is equipped with the powerful Dragonfly MC1105 7500KV motors which has been proven very powerful with X-Racer KL-EX90. Features:Small in size and light in weight. All-up-weight is 83 grams only without battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.Fast as other 5" 4S racing quads. Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. .Equipped with powerful and reliable micro Dragonfly MC1105 7500kv brushless motors. Gemfan 2035BN 4-blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. Parts Included:1 x X-Racer X9 Frame4 x Dragonfly MC1105 7500kv Motor1 x Raceflight Millivolt Flight Controller1 x Raceflight Spark 4n1 ESC1 x RunCam Micro Swift 2 FPV Camera (Update on September 12th.)1 x Dranonfly 5.8g 25MW 48CH Vtx4 Pairs x GemFan 2035BN 4-Blade Propellers1 x 16AWG Silicon Wire1 x Amass XT30 Plug Male16 x M2*4 Screws16 x M2*6 Screws10 x M2*7 Screws4 x M3*18 Screws7 x M2*19 Aluminum Standoff10 x M3 Black Nylon NutX-Racer X9 Brief Installation Manual: PDF DownloadFriendly reminder: The DIY version contains the parts that you need to build, but they are not assembled yet. The battery and transmitter that shown on the pictures are not included. 

    Review: Write a Review

    $228.00 $186.96, Save 18% OFF

    SKU:X9ARF

    Weight: 0.30 kg

  • OMNIBUS F4 Pro Corner Flight Controller
    OMNIBUS F4 Pro Corner Flight Controller

    The Omnibus F4 Pro Corner flight controller uses the ICM20608 over SPI for the best possible flight performance. With onboard damping box, the ICM20608 runs perfect under 32k Gyro loop. If you havent already seen it, you should check out Joshs awesome video on different IMUs. Also onboard are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD.Omnibus F4 Pro Corner supports 3-6s LIPO direct input, build in Current Sensor and Power Filter too.The on Board PDB is tweaked by using 12-Layer PCB design. There is only 0.2-0.5 mohm internal resistance from input to each output padsFeatures:- STM32 F405 MCU, Runs Betaflight firmware(supported from v3.2)- ICM20608 Over SPI Bus in damping box. (optional MPU6000)- 30.5x30.5mm Mounting holes- Supports Lipo direct plug in (3-6S)- Suports 5V 1A BEC output(Buck)- STM32 controls OSD chip over SPI in DMA mode(Betaflight OSD)- Build in Current sensor- Build in Professional level PDB- Build in LC filter for Camera power(max 800ma)

    Review: Write a Review

    $49.99 $43.99, Save 12% OFF

    SKU:CF4PC

    Weight: 0.10 kg

  • OMNIBUS AIO F7 V2 Flight Controller
    OMNIBUS AIO F7 V2 Flight Controller

    Features:- F7 MCU - faster than the current F3 and F4 processors- Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz- Built in betaflight OSD- 36x36mm, mount holes 30.5x30.5mm- SD card reader for recording black box data (SD card not included)- Supports 2-4s natively, 5-6s with 220uf 35V capacitor- 5v/1A regulator- Port for easy connection to Airbot 4-in-1 esc (SH1.0 8P)

    Review: Write a Review

    $55.00 $48.40, Save 12% OFF

    SKU:OF7V2

    Weight: 0.10 kg

  • RMILEC Multi-unity Signal Converter Signal Analyzer  V3
    RMILEC Multi-unity Signal Converter Signal Analyzer V3

    RMILEC Multi-unity Signal Converter Signal Analyzer V3This is the latest generation of RMILEC signal converter V3 which is able to convert PWM signal into PPM signal and SBUS signal, or convert two-way PPM signal into PWM signals and SBUS signals, or convert SUBS signal into PWM signal and two-way PPM signal.  It is used to debug UAV, robot and other equipment, accurately observes the control data of servos via computer.Features:Mode 1: PWM signal converted into PPM signal and sbus signal. PWM signal analyzes.Mode 2: Two-way PPM signals converted into PWM signals and sbus signals. Two-way PPM signal analyzes.Mode 3: SBUS signal converted into PWM signal and a two-way ppm signal. Sbus signal analyzes.Specifications : Size: 35.6 * 29 mmWeight: 8.5 gramsPrecision: 250 nanosecondsVoltage: 3.3-12V Support for reverse protectionConversion speed: Interrupt decoding without waiting after the signal is collectedpin header: 2.95 mm longitudinal spacing receiver pin header

    Review: Write a Review

    $15.99 $13.43, Save 16% OFF

    SKU:RSCV3

    Weight: 0.10 kg

  • Matek 5.8G 40CH 25/200/500mW Switchable Video Transmitter VTX-HV With BFCMS Control
    Matek 5.8G 40CH 25/200/500mW Switchable Video Transmitter VTX-HV With BFCMS Control

    Mateksys is expanding their product range and releasing their own video transmitters. The first one is Matek VTX-HV. It is separate half size of a normal FC, stackable board with OSD. ‘HV’ probably stands for High Voltage, as this VTX works directly from up to 6S HV LiPo battery. Has 5V output for camera, audio input, iPEX antenna connector, LED’s for channel band and power indication and traditional button control.Specifications & Features:Input voltage: 7~27V(2~6S LiPo)40 standard channels, A/B/E/F/R BandOutput Power: 25, 200, 500mW switchableBEC Output: 5V/1A for Camera or FCTraditional button+LED control of frequency and powerBFCMS (BFOSD & LUA Script) control via FC UART _TXFirmware upgradeablePower Consumption: 3.1W Max. @ 500mWVideo Input Impedance: 75 OhmAudio Subcarrier Frequency: 6.5 MHzRF Connector: U.FL (IPEX)Video Format: NTSC/PALWeight: 6g (Tx only, w/o SMA cable)Size: 36*22*6.5mm w/30.5mm mountingIncluded:5.8G Video transmitterIPEX to SMA Female, RG178 cable 10cmIPEX 5.8G whip antenna, RG178 10cmPVC Heat-shrink tube

    Review: Write a Review

    $29.90 $26.91, Save 10% OFF

    SKU:VTX-HV

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.