Sorted:
  • Dragonfly Hurricane 2207 KV2500 Brushless Motor for FPV Racer
    Dragonfly Hurricane 2207 KV2500 Brushless Motor for FPV Racer

    Specially deisigned for FPV racing with extreme performanceFast response and ultimate efficiencyNew technology to ensure smooth runningPrecise balanced and fully testedPowerful, reliable, and quick. This is the latest Dragonfly Hurricane 2207 2500KV brushless motor that specially designed for FPV racing and extreme performance. These Dragonfly Hurricane 2207 2500kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.Features:Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.We have greatly improved their thrust and efficiency comparing to other motors on the market. At the same time, we have enhanced the response speed to guarantee the smooth flying of your racing quadThe use of special aluminum material for body structure, not only comes with a greater strength than those motors made of the 6 series aluminum that most other motors use, but also greatly reduce the weight. The motor shaft has abandoned the traditional way of installation, the spindle completely goes through the threaded shaft to improve the friction between steel shaft and threaded sleeve of head cover. It also improves the concentricity of motor rotor and effectively increases the strength of propeller shaft, so that to make sure the motor can survive from the hard crashes.The Draongfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.Specifications:KV: 2500KVNo.of Cells(Lipo): 3-5SConfiguration: 12N14PStator Diameter: 22mmStator Length: 7mmShaft Diameter: 5mmMotor Dimension (Dia.*Len): Φ27.9×32.7mmWeight(g): 30.3g(Excluding Cable)Recommend Propeller: 5″Recommend ESC: 30-50AWire AWG: 20AWG|Magnet: N52SH Stator: Japan KAWASAKIBearings: NSKThese Dragonfly Hurricane 2207 2500kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.The Draongfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.

    Review: Write a Review

    $13.99-$54.99

    SKU:DG0725

    Weight: 0.10 kg

  • Dragonfly MC1105 Micro Class Racing Motor 7500kv
    Dragonfly MC1105 Micro Class Racing Motor 7500kv

    X-Racer KL-EX90 LOS Maiden Flight : Insane 2inch Power! By the RCAddictThese are the new Dragonfly MC1105 7500kv brushless motors for micro class racing quads. They have been proven powerful and reliable at race track, while our team pilot Ka Kei Leung flew the 2" KL-EX90 with these micro motors to compete with 4s 5" bigger racing quads. Click to watch the video. Recommend to use Gemfan 2-3" propellers and 12A ESCs.Dragonfly MC1105 Mini Motor Specifications:KV: 7500KVNo.of Cells(Lipo)): 2S-3SStator Diameter: 11mmStator Length: 5mmShaft Diameter: 1.5mmMotor Dimensions(Dia.*Len): Φ14.2×14.45mmWeight (g): 6gRecommended propellers: Gemfan 2-3″, Gemfan 2035BNRecommended ESC: 12A

    Review: Write a Review

    $9.99-$38.99

    SKU:KL90MT

    Weight: 0.10 kg

  • FPVMODEL MC1806 2300KV Brushless Motor for Multirotor
    FPVMODEL MC1806 2300KV Brushless Motor for Multirotor

    FPV Model is seeking experienced motor reviewers. For those of you whom we choose to do the review, we will send you a set of four motors at absolutely no cost to you. If you are interested in reviewing the motors, please follow the thread on RCgroups: http://www.rcgroups.com/forums/showthread.php?t=2291393FPVModel MC1806 2300kv motors use the high quality Japanese NMB bearings and powerful N42sh magnets for optimal efficiency. Main Features:CW/CCW thread SelectablePrecision Japanese NMB bearingsHigh Power N42sh magnetsCNC MachiningBullet and Flat Style Prop Adapters IncludedHigh quality meets affordability. You can find some reviews on the motors that made by independant 3rd parties at Youtube : https://www.youtube.com/results?search_query=FPVMODEL+motor. Every FPVModel motor comes with a 30 days Satisfaction Guarantee. If for any reason you are not COMPLETELY 100% SATISFIED, you can return the motors for a full refund within 30 days upon receiving them. Note:The motor does not include the screws for mounting with plane arm plate.If the thread rotates clockwise, the motor rotates counter-clockwise and vice versa. 

    Review: Write a Review

    $10.99 $8.24, Save 25% OFF

    SKU:FMMC1806-2

    Weight: 0.20 kg

  • EMAX RS2306 2400kv White Editions RaceSpec Brushless Motor
    EMAX RS2306 2400kv White Editions RaceSpec Brushless Motor

    For version 2750kv, please check at https://www.fpvmodel.com/emax-rs2306-2750kv-white-editions-racespec-brushless-motor_g1259.html.The RS2306 was designed to set a new standard of power and response for pilots seeking the ultimate in flight performance. With nearly twice the level of thrust of the original Red Bottom, the new RS2306 sets the bar even higher by pushing 2kg of thrust with 5045x3 propeller on 5S or 6045x3 on 4S.Latest design language used in RS2205-S have been carried over to the RS2306. Lighter bell, hollowed steel shaft, bigger bearings, lower profile, and kept the overall diameter just 0.4mm wider than RS2205-S!Specification:-2kg Thrust from a 2306 class motor!-Larger Stator for smooth, responsive power.-BEEFY 4mm Hardened and Tempered Hollow Steel Shaft: Breaking shafts are a thing of the past.-0.15mm High Silicon-Steel Laminations: Higher volume of silicon increases electrical resistance in the lamination, reducing eddy-currents within the system (Translates electrical energy into mechanical energy more efficiently.). -High quality 4mm Inner Diamter Steel Ball Bearings.-1.8mm N48SH Arc magnets (thinner and lighter which allow lower mass on the outer portion of the bell, resulting in faster acceleration. Less energy lost and more power delivered to the propeller).-Special Edition Matte White Bell.-Hex head bell fastener for easy servicing or bell replacement.-PROPLOCK base for future performance-matched propellers: This anti-slip design locks in the propellers on to the motor to prevent Prop slippage during the hardest obstacle strikes.-34 grams - Contrary to what most pilots say about motor weight Lighter is not always better. In this class of a motor that pushed 1,000s of grams of thrust, 34g is the absolute minimum without compromising structural integrity.RS2306 2400kv Data:

    Review: Write a Review

    $22.99 $18.85, Save 18% OFF

    SKU:RS2306-24

    Weight: 0.15 kg

  • 6x15mm Coreless Motor for Blade Inductrix and Blade Nano QX (Speed: Fast)
    6x15mm Coreless Motor for Blade Inductrix and Blade Nano QX (Speed: Fast)

    These are powerful motors that works great in the Blade Inductrix, Blade Nano QX, Blade CPX/S. These motors come with plug and 6cm wire, they are better suited to FPV and will be the perfect upgrade for your Tiny conversion. If you are looking for punch and durability, you found it. Warning: These motors are too power hungry for the stock packs! You need strong batteries to run these motors at full performance. Suggest use 205mah mylipo pack, and they will deliver a lot of punch and maximum runtime.Warning: Applies only to the original Nano QX, without FPV. These motors will turn your Nano QX into an insane jaw-dropping pocket rocket, but it will not like hovering! Depending on the battery you use, you will see varying degrees of oscillations (wobble) during hover and slow flight in SAFE mode. Agility mode does not have this problem.Specifications:Speed: 14.000KvOperating voltage: 1.5-3.7VMax. thrust: 15g (direct drive)1.0A load current at 3.7V (direct drive)Lifetime rating: 5-6 hoursPlug: Micro-JST-1.25Clockwise: red +, blue -Counter clockwise: white +, black -Warning: To maximize performance and life span, please do not run them in reverse! Wire colors are reversed.Dimensions:Motor diameter: 6mmMotor length: 15mmShaft Diameter: 0.8mmShaft Length: 4mmWeight: 1.8g Wire length: 60mmPlease note: wire color coding is reversed from the stock motors. Blade has decided to code their motors differently to everyone else in the industry. If you take off, and your Inductrix or Nano QX spins in circles and yaws like a micro frisbee on steriods, please note wire colors are reversed. Your motors are installed in the wrong spots.

    Review: Write a Review

    $6.99 $4.05, Save 42% OFF

    SKU:CL14M

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.