Sorted:
  • ZMR-X210 V1.1 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit
    ZMR-X210 V1.1 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit

    FPVModel ZMR-X210 Detailed Build by Mr. Joshua Bardwell"ZMR-X210 FPV & Motorcross" by Titan Chan, FPVModel Sponsored PilotThe ZMR-X210 is an evolution of the ZMR design, in keeping up with the changing times this ZMR was re-worked from the ground up. We are not just modifying the arms to give a "X" type of layout, we have re-worked it entirely to provide what the modern user wants. This frame features aluminum mounting hardware that allows for faster arm changes. This frame also gives the user options for weight saving. By using a single bottom plate the user can opt for weight savings by leaving out the 4mm spacers and "2nd" bottom plate. (This saves weight by eliminating the use of one plate and 8 4mm spacers.) The weight savings can be crutial in times of attending races but the arms being sandwiched between two plates and using the 4mm spacers allows for exceptional strengh improvement too. The choice is up to the pilot...save the weight in times of racing or use both plates when flying free-style and expecting to crash frequently and desire strenth over a few grams of weight savings. Featuring an X design made popular by the likes of Alien and QAVraceblade/R this quad is sure to help keep the center of gravity where you want it, in the center.The ZMR-X210 ARF packages are also available for your easy setup.Includes:1x ZMR-X210 Carbon Fiber Frame4x 4mm Carbon Fiber Arms 1X camera mount for Foxeer Arrow V2 HS1190 and the cameras in similar size (26mm)1x Board Camera Mount 1x Set of Steel screws, aluminum mounting hardware, and standoffs 2x FPVModel velco strap1x 1.5mm top plate 2x 2mm lower platesWeight: 174 grams (Frame and hardware totally ) Updated on May 18th, 2016: The ZMR-X210 has been upgraded to Version V1.1.

    Review: Write a Review

    $21.99

    SKU:ZMR210VP

    Weight: 0.50 kg

  • Dragonfly Hurricane 2207 KV2300 Brushless Motor for FPV Racer
    Dragonfly Hurricane 2207 KV2300 Brushless Motor for FPV Racer

    Specially deisigned for FPV racing with extreme performanceFast response and ultimate efficiencyNew technology to ensure smooth runningPrecise balanced and fully testedPowerful, reliable, and quick. This is the latest Dragonfly Hurricane 2207 2300KV brushless motor that specially designed for FPV racing and extreme performance. These Dragonfly Hurricane 2207 2300kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.Features:We have greatly improved their thrust and efficiency comparing to other motors on the market. At the same time, we have enhanced the response speed to guarantee the smooth flying of your racing quadThe use of special aluminum material for body structure, not only comes with a greater strength than those motors made of the 6 series aluminum that most other motors use, but also greatly reduce the weight. The motor shaft has abandoned the traditional way of installation, the spindle completely goes through the threaded shaft to improve the friction between steel shaft and threaded sleeve of head cover. It also improves the concentricity of motor rotor and effectively increases the strength of propeller shaft, so that to make sure the motor can survive from the hard crashes.These Dragonfly Hurricane 2207 2300kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.The Dragonfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.

    Review: Write a Review

    $13.99-$54.99

    SKU:DG0723

    Weight: 0.15 kg

  • Dragonfly Hurricane 2207 KV1700 3-6S Brushless Motor for FPV Racer
    Dragonfly Hurricane 2207 KV1700 3-6S Brushless Motor for FPV Racer

    Specially deisigned for FPV racing with extreme performanceFast response and ultimate efficiencyNew technology to ensure smooth runningPrecise balanced and fully testedPowerful, reliable, and quick. This is the latest Dragonfly Hurricane 2207 1700KV brushless motor that specially designed for FPV racing and extreme performance. These Dragonfly Hurricane 2207 1700kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.Features:We have greatly improved their thrust and efficiency comparing to other motors on the market. At the same time, we have enhanced the response speed to guarantee the smooth flying of your racing quadThe use of special aluminum material for body structure, not only comes with a greater strength than those motors made of the 6 series aluminum that most other motors use, but also greatly reduce the weight. The motor shaft has abandoned the traditional way of installation, the spindle completely goes through the threaded shaft to improve the friction between steel shaft and threaded sleeve of head cover. It also improves the concentricity of motor rotor and effectively increases the strength of propeller shaft, so that to make sure the motor can survive from the hard crashes.These Dragonfly Hurricane 2207 1700kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.The Dragonfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.

    Review: Write a Review

    $13.99-$51.39

    SKU:DG0717

    Weight: 0.15 kg

  • Robotdog RD2205  Racing Motor 2300KV/2500KV
    Robotdog RD2205 Racing Motor 2300KV/2500KV

    RobotDog just dropped the newest line of RD2205 in 2 different KV ratings, 2300 and 2500, featuring a budget motor with reliability at a price tag of just $9.99.RobotDog has been continuously working hard on cost-effective products.The low price does not mean that the Robotdog motor is lacking power.The completely redesigned RD2205 is upgraded with features racing multirotors need. The motor is lighter and yields faster bell rotational response.Its perfectly designed as a budget motor for FPVers from beginners to intermediates.

    Review: Write a Review

    $9.99-$32.48

    SKU:RD0523

    Weight: 0.10 kg

  • X-Racer X-1 V2 BNF with Two Batteries
    X-Racer X-1 V2 BNF with Two Batteries

    X-Racer X-1 Review by the RCAddictNote: Due to the air regulation, the batteries can only be shipped to following countries by E-packet:Canada, Australia, France, Germany, United Kingdom and United States. By Registered Airmail Shipping: Japan, Brazil and Russia.  If you are from other countries or areas, please help to choose DHL for shipping.Note: The BNF needs 1 to 3 days to test and assembly.The X-Racer X-1 micro racer is making a return with an all new with the F3 brushed flight controller. We are always listening to what our customers say and we have made some improvements accordingly. Now the new X-Racer X-1 F3 Fight Controller V2 comes with Frsky Rx and OSD Integrated.Agile, safe and fun. The X-Racer X-1 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to both the first time pilot and advanced pilots.  We understand that some of you just want to fly and enjoy the race. So you can also just choose the BNF version and leave all the assembly & testing job to us. The BNF version is a fully assembled kit and it is fully tested before shipping. All firmwares are loaded and customers just need to bind with their Frsky transmitter and enjoy the flight.Main Features:1. Pre-flashed with the latest Betaflight firmware. 2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The case is available in various colors. (Blue, Gray, Yellow, Rose, optional )6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in BNF Combo :X-Racer X-1 V2 Frame x 1X-Racer X-1 V2 Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered, Camera in PAL format)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 2 Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1You might also like: HobbyTiger BC-1S06 Lipo 6 Port Battery Charger or 4 Ports 1S Lipo Charger With XT60 Plug

    Review: Write a Review

    $59.99

    SKU:X1FC

    Weight: 0.40 kg

  • Dragonfly MC1105 Micro Class Racing Motor 6000kv/7500kv
    Dragonfly MC1105 Micro Class Racing Motor 6000kv/7500kv

    X-Racer KL-EX90 LOS Maiden Flight : Insane 2inch Power! By the RCAddictThese are the new Dragonfly MC1105 6000kv/7500kv brushless motors for micro class racing quads. They have been proven powerful and reliable at race track, while our team pilot Ka Kei Leung flew the 2" KL-EX90 with these micro motors to compete with 4s 5" bigger racing quads. Click to watch the video. Recommend to use Gemfan 2-3" propellers and 12A ESCs.Dragonfly MC1105 6000KV Mini Motor Specifications:KV: 6000KVNo.of Cells(Lipo)): 2S-3SStator Diameter: 11mmStator Thickness: 5mmShaft Diameter: 1.5mmMotor Dimensions(Dia.*Len): Φ14.2×14.45mmWeight (g): 5.89gRecommended propellers: Gemfan 2-3″, Gemfan 2035BNRecommended ESC: 8A-15AMax Continuous Current(30s): 7.5AMax Continuous Power(30s): 90W

    Review: Write a Review

    $10.99-$38.99

    SKU:KL90MT

    Weight: 0.10 kg

  • X-Racer X-1 F3 Flight Controller V2 with Frsky Rx and OSD Integrated
    X-Racer X-1 F3 Flight Controller V2 with Frsky Rx and OSD Integrated

    The X-Racer X-1 Whoop flight controller is making a return with an all new update. We are always listening to what our customers say and we have made some improvements accordingly. In reality, this is not just a simple whoop flight controller that was designed by us but its more of an FC that has been re-designed by users like you.This micro whoop brushed F3 flight controller was designed for X-Racer X-1, but it also can be used on those micro quadcopters like Tiny Whoop and Blade Inductrix.Features:1. The RX connection protocol has been upgraded from PPM to SBUS. With the SBUS protocol, you are able to get a faster response when the micro racer turn around.2. The integrated OSD (on screen display) is able to show some important flight data on your FPV feed, including battery voltage, current draw etc. You can even use it as a menu to change your quad’s PID, rates, filters and others.3. Larger MOS ensures a smoother flying with your micro racer. 4. The DC regulator module has been upgraded for a better loading capacity.5. Compatible with FrSky & SBUS, USB port ready.6. Pre-flashed with the latest Betaflight firmware.7. The binding buttons for the built-in Frsky RX have been updated, more convenient to use.How to Bind Built-in FrSky RX.1. Press "Band" to power on the quad, the middle red LED will turn on.2. Turn on your FrSky transmitter, set the mode to D8, 1-16CH, and then start to bind.3. After successfuly binding, on the right corner the red LED will start to slowly flash.4. Re-power on the flight controller, the binding is completed.How to Bind other RX.1. Connect the FC to Betaflight.2. Enter following instruction in CLI: set sbus_invention = on. And then save.3. The UART needs to choose 3.(Please take a note that the FC automatically works with the built-in FrSky RX, if you want to use with other RX, please set the CLI before using.)

    Review: Write a Review

    $29.99

    SKU:XR1FCU2

    Weight: 0.10 kg

  • BetaflightF7 RV1 Flight Controller
    BetaflightF7 RV1 Flight Controller

    Betaflight F7 is here and it features a completely new layout. Top mounted solder pads ensure ease of access for the even the trickiest of builds. The Betaflight F7 features dual gyros so the user can have their choice of which one to use, either the tried and true MPU6000, or the ICM20608. You’ll find the specs listed below:Specifications:3-6s Simplistic LayoutTwo Gyro optionsBetaflight OSDFiltered output for FPV systemsSmart Audio/Tramp Telemetry compatibily4 uarts (can read inverted and univerted signals)Camera Control BuzzerBlackbox via flash memory 30.5x30.5 FC mountingBetaflightF7 Setup Guide: Features: Programmable LEDs, Flash Memory, individual pad for camera control, labeled Smart Audio/Tramp TX1 next to VTx soldering pads. Labeled Smart Port TX2 pad next to Sbus/Ibus/DSM2 UART6 Tx, 5v and 3.3v pads (user selection based on type of receiver used), four pads for ESC telemetry connected to RX1.(Each pad placed near corners of the board) By Philipp Seidel, Click to Enlarge

    Review: Write a Review

    $59.99

    SKU:BFF7

    Weight: 0.10 kg

  • RunCam RC25G FPV Lens 2.5mm FOV140 Wide Angle for Swift Series Eagle 4:3 Series Split
    RunCam RC25G FPV Lens 2.5mm FOV140 Wide Angle for Swift Series Eagle 4:3 Series Split

    RunCam RC25G FPV Lens 2.5mm FOV140 Wide Angle for Swift Series Eagle 4:3 Series SplitPackage :1 X Lens1 X Lock Ring

    Review: Write a Review

    $12.99 $9.99, Save $3.00 OFF

    SKU:RC25G

    Weight: 0.10 kg

  • Robotdog 35A 32Bit 2-4S BLHeli_32 ESC Dshot1200
    Robotdog 35A 32Bit 2-4S BLHeli_32 ESC Dshot1200

    * MSRP $15.00, for a limited time, the Robotdog is sold at $9.9 only. Dont miss it out if you are buiding on budget.The low price does not mean that the Robotdog is lacking power. It has all features a 32bit BLHeli ESC has!!! 35A designed, ARM 32bit Cortex-M0 MCU, 1500uF cap onboard, 2-4s input and Dshot at least Dshot1200.Robotdog 35A is a new 32bit BLHELI ESC from Battle RC that uses the latest BLheli_32 firmware. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported. If you are seeking for a small, powerful blheli_32 capable 32bit ESCs, the Robotdog ESCs certainly fit the bill providing 35Amps of power.BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S. It runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster. ?BLheli_32 can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.Here is what BLHELI_32 has to say about their new "Power to perform":Programmable PWM frequency of up to 48KHzAuto-timing for higher efficiency and reliabilityVoltage/Current limitingAdjustable “Brake on Stop” forceImprove direction change in Bidirectional modeConfiguring from FC using DShot commandsFeatures:Blheli_32 codeARM 32bit Cortex-M0 MCUDshot up to at least Dshot12001500uF cap onboard2-4s LiPo input.35A designed32x17 mmSome Tips:BLHeli_32 ESC Firmware OverviewHow to Connect BLHeli_32 ESC to Congigurator BLHelisuite32 via FC PassthroughWhat is Dshot1200 and Why Dshot1200 is Better?How to Get Dshot1200 Running in Betaflight?Downloads:Download the latest BLHeli_32 Configurator here.Download the BLHeli_32 User Manual here.Download Betaflight 3.2.0 here.

    Review: Write a Review

    $15.00 $9.90, Save $5.10 OFF

    SKU:RD35A

    Weight: 0.10 kg

  • Dragonfly Hurricane 2207 KV2500 Brushless Motor for FPV Racing
    Dragonfly Hurricane 2207 KV2500 Brushless Motor for FPV Racing

    Specially deisigned for FPV racing with extreme performanceFast response and ultimate efficiencyNew technology to ensure smooth runningPrecise balanced and fully testedPowerful, reliable, and quick. This is the latest Dragonfly Hurricane 2207 2500KV brushless motor that specially designed for FPV racing and extreme performance. These Dragonfly Hurricane 2207 2500kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.Features:Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.We have greatly improved their thrust and efficiency comparing to other motors on the market. At the same time, we have enhanced the response speed to guarantee the smooth flying of your racing quadThe use of special aluminum material for body structure, not only comes with a greater strength than those motors made of the 6 series aluminum that most other motors use, but also greatly reduce the weight. The motor shaft has abandoned the traditional way of installation, the spindle completely goes through the threaded shaft to improve the friction between steel shaft and threaded sleeve of head cover. It also improves the concentricity of motor rotor and effectively increases the strength of propeller shaft, so that to make sure the motor can survive from the hard crashes.The Draongfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.Specifications:KV: 2500KVNo.of Cells(Lipo): 3-5SConfiguration: 12N14PStator Diameter: 22mmStator Length: 7mmShaft Diameter: 5mmMotor Dimension (Dia.*Len): Φ27.9×32.7mmWeight(g): 30.3g(Excluding Cable)Recommend Propeller: 5″Recommend ESC: 30-50AWire AWG: 20AWG|Magnet: N52SH Stator: Japan KAWASAKIBearings: NSKThese Dragonfly Hurricane 2207 2500kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.The Draongfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.

    Review: Write a Review

    $13.99-$51.39

    SKU:DG0725

    Weight: 0.10 kg

  • Wraith32 MINI V2 32bit BLHELI_32  35A ESC
    Wraith32 MINI V2 32bit BLHELI_32 35A ESC

    The Wraith32 Mini V2 35A ESC is an upgraded version of previous Wraith32 Mini 25A. Comparing to the first version, the Wraith32 Mini V2 has more capacitors to help smooth noisy environment, and the data transmission interface is placed outside.Specifications:2-6s LIPO input35A designed10*20mmBLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.So what can the increased MCU speed do?First of all, it can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.Secondly it allows packing of more functionality. - Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.- Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.- Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.- Like improved direction change in bidirectional mode.- Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.Some Tips:BLHeli_32 ESC Firmware OverviewWhat is Dshot1200 and Why Dshot1200 is Better?How to Get Dshot1200 Running in Betaflight?Downloads:Download the latest BLHeli_32 Configurator here.Download the BLHeli_32 User Manual here.Download Pre-release version of Betaflight 3.2.0 here.

    Review: Write a Review

    $16.99 $14.95, Save 12% OFF

    SKU:W32MV2

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.