Sorted:
  • RMILEC Multi-unity Signal Converter Signal Analyzer  V3
    RMILEC Multi-unity Signal Converter Signal Analyzer V3

    RMILEC Multi-unity Signal Converter Signal Analyzer V3This is the latest generation of RMILEC signal converter V3 which is able to convert PWM signal into PPM signal and SBUS signal, or convert two-way PPM signal into PWM signals and SBUS signals, or convert SUBS signal into PWM signal and two-way PPM signal.  It is used to debug UAV, robot and other equipment, accurately observes the control data of servos via computer.Features:Mode 1: PWM signal converted into PPM signal and sbus signal. PWM signal analyzes.Mode 2: Two-way PPM signals converted into PWM signals and sbus signals. Two-way PPM signal analyzes.Mode 3: SBUS signal converted into PWM signal and a two-way ppm signal. Sbus signal analyzes.Specifications : Size: 35.6 * 29 mmWeight: 8.5 gramsPrecision: 250 nanosecondsVoltage: 3.3-12V Support for reverse protectionConversion speed: Interrupt decoding without waiting after the signal is collectedpin header: 2.95 mm longitudinal spacing receiver pin header

    Review: Write a Review

    $15.99 $13.43, Save 16% OFF

    SKU:RSCV3

    Weight: 0.10 kg

  • LPF1400 1.2Ghz Low Pass Filter for solving the issue with 2.4GHz RC Systems
    LPF1400 1.2Ghz Low Pass Filter for solving the issue with 2.4GHz RC Systems

    1.2GHz Low Pass Filter attenuates RF noise which interferes 2.4Ghz RC receivers, tiny and useful, a very nice filter. Helps 1.2GHz Wireless Video Transmitter to prevent unwanted RF noises. 12LPF 1.2G Low pass filters can reduce the interference to 2.4GHz receivers to prevent jitter servo issues. You may install it onto your receivers or transmitters, for filtering out unwanted RF noises1.2Ghz Low Pass Filter for solving the issue with 2.4GHz RC Systems Designed for 910MHz - 1390MHz Wireless A/V transmittersLow insertion loss, less than 0.7dB typical at 1300MHzPassband DC - 1425MHz (<-1.5dB loss)Efficient monolithic LC multi-pole topography designSecond harmonic (> 2.4GHz) attenuation -35dB typicalSMA connectors (male / female)Characteristic impedance 50 ohmHandles RF power up to 8 wattsSmall size, 1.45 x 0.31 x 0.25 inches (37 x 8 x 6.5 mm)Lightweight, 5.45 g

    Review: Write a Review

    $22.90 $12.82, Save 44% OFF

    SKU:LPF1400

    Weight: 0.05 kg

  • 3 Channel Video Switcher Module 3 way Video Switch Unit for FPV Camera
    3 Channel Video Switcher Module 3 way Video Switch Unit for FPV Camera

    Descriptions:- This is a 3 channel Switchover module,adopts high speed video switch chip,effectively reduce the vibration of the Video image. - compatible with 3 position Switch Channel- Port "in" is video signal input,IN1,IN2,IN3,OUT is video output- "-" is negtive pole,"+" suspend,"S" is receiving Video signa- Size: 4.5*1.8*0.5- Input voltage:4.8-6v- Input channels:3- Output channel: 1- Video signal impedance: 75Ω* The control channel can be any proportional channel or 3-position switch channel. (2-position switch channel can only switch within two video input signals)Video signal connector sequence: "-" for negative, "+" not used, "S" for video signal

    Review: Write a Review

    $9.90

    SKU:3CVSM

    Weight: 0.05 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.