Sorted:
  • Hawkeye Firefly Micro 1080P Mini Action Camera
    Hawkeye Firefly Micro 1080P Mini Action Camera

    Specifications:Image Sensor: 2MPColor: BlackVideo Resolution: 1080P @ 30fps / 720p @ 30fpsVideo Record Format; MJPGLens: 160 DegreeAV out: YESStorage Card: 8G32GBattery Capacity: 200MAHBattery life: 1 HourCharge Port: 230mAhSize: 24*24*32mmWeight: 14g Package included:1 x USB/AV cable1 x FPV bracket1 x Sports bracket

    Review: Write a Review

    $27.99

    SKU:HKMNC

    Weight: 0.20 kg

  • RunCam RC25G FPV Lens 2.5mm FOV140 Wide Angle for Swift Series Eagle 4:3 Series Split
    RunCam RC25G FPV Lens 2.5mm FOV140 Wide Angle for Swift Series Eagle 4:3 Series Split

    RunCam RC25G FPV Lens 2.5mm FOV140 Wide Angle for Swift Series Eagle 4:3 Series SplitPackage :1 X Lens1 X Lock Ring

    Review: Write a Review

    $12.99

    SKU:RC25G

    Weight: 0.10 kg

  • Aomway TX004 Mini 5.8G 25mw/100mw/200MW Power Switchable Transmitter
    Aomway TX004 Mini 5.8G 25mw/100mw/200MW Power Switchable Transmitter

    TX004 Transmitter is a 5.8G ISM band simulation diagram transmitter with a stable output power, long-distance transmission,  powerful filter. Can guarantee the image of the maximum throttle no snow, no stripes and so on. TX004 transmitter also has the funtion of remote control the OSD interface and support for more than 8 peoples at the same time flying.Features:-Output power is stable, long-distance transmission: ≥0.5km@25mW, ≥0.8km@100mW, ≥1km@200mW (Original antenna)-Transmit power 4 block switch: 0mW/25mW/100mW/200mW-64 frequency output, has E group of eight competition frequency at the same time without interference-Fast frequency lock-With self-test output power-Video format: NTSC /PAL-Wide input voltage range, low power consumption: 7V~24V,+12V/170mA@200mW.-Small volume: 27mm×27mm×4.5mm-Light weight: ≤3g (Do not including the antenna)Frequency Table:

    Review: Write a Review

    $16.99

    SKU:AWTXT

    Weight: 0.10 kg

  • Aomway 5.8G 500mW A/V Transmitter  for FPV (fatshark compatible)
    Aomway 5.8G 500mW A/V Transmitter for FPV (fatshark compatible)

     Features:New 5.8G 500mw Vtx/rx from aomway,the latest 5.8G receiver with 32 frequency point, cover almost all frequency band.The lightest 500mW  AV transmitter in the market, only 17g. With 3.5dbi omni directional antenna, improve the AV transmission distance and quality.Fatshark compatible.Transmitter Specifications:- Weight: 17g- Size: 5.5*2.7*0.7cm- Wide voltage input: DC7-16V- Consumption: 12V 220mA 15% fluctuate- Power: 500mW/26.5dBm- Dual frequency point: 5740-5860Mhz(Fatshark)/5705-5946Mhz(common)- 15 transmite channel: CH-1 7/CH-2 8- Audio: Left/Right stereo- Format: PAL/NTSC- Output voltage: 5V-12VDial SMT switch button, choose Fatshark frequency band or common band Receiver features:- 5.8G receiver, 32 frequency point, cover almost all frequency band- Frequencyband and frequency point independant display, aovoid mistake- Upgrade video circuit and sensitivity, with 1W telemetry, could fly 32KMReceiver parameters:- Working Frequency: 5740-5860MHz (Fatshark dedicated ) / 5705-5945MHz ( Universal )5733-5866MHZ/5725-5865MHZ- No DVR function- Wide input voltage : 7V-16V- DC 12V,170mA- 15 transmit channels : CH-1 7channels CH-2 8channels- Sound: about two-channel stereo output- AV Video Output: 2 AV output- Weight : 126g- Size : 80 * 70 * 25mmUpdate on June 6th, 2017: The receivers channel have been upgraded. From 32CH into 48CH.

    Review: Write a Review

    $82.90 $48.08, Save 42% OFF

    SKU:A5G8500TX

    Weight: 0.40 kg

  • RunCam TX200 3.5-5.5V 5.8G 48CH 200MW Video Transmitter
    RunCam TX200 3.5-5.5V 5.8G 48CH 200MW Video Transmitter

    TX200 VTX is the first video transmitter from Runcam. It is super light weight and designed specifically for the Runcam Micro Swift 2 camera.The Runcam TX200 is a very simple and plain VTX, there is only one button to change channel, band and power, and some LED’s indicating what settings the VTX is on. The VTX is built on a 19x19mm square PCB and it can be mounted directly on the back of a Micro Swift or Micro swift 2 with the provided standoffs and screws.You can use this VTX as a standalone VTX too if you wish. The standoffs leave a gap between the camera and VTX PCB’s, allows for airflow and better cooling.To know more about Runcam TX200 video transmitter, you can take a reference to Oscar Liangs review.Frequency SetupLock mode:Red LED flashes, only 25mW & limited frequency available;Unlocked mode:Red LED keeps on, 200mW & all 48 channels available; By long pressing button for 10 seconds, you can switch between the two modes.Note: Before you get TX200 unlocked, it is highly recommended to know about the rules and regulations in your country about the frequency to avoid a fine or confiscation of your device.1 Blue LED for ChannelShort press the button to switch the Channel, Channel 1/2/3/4/5/6/7/8 in sequence. For each short press, the Blue LED flashes once, and only when its under the Channel 1, the LED is always on.6 Red LED for BandLong press the button two seconds to switch the Band, Band 1/2/3/4/5/6 in sequence.For each long press, the six Red LEDs light in turn.1 Orange LED for PowerLong press the button five seconds to switch the power, on is 200mw, off is 25mw, lock mode is limited to 25mw.Frequency TableParameter

    Review: Write a Review

    $14.99

    SKU:RCTX200

    Weight: 0.14 kg

  • RunCam Nano FPV Camera PAL
    RunCam Nano FPV Camera PAL

    Description:Model: RunCam NanoImage Sensor: 1/3" CMOS SensorHorizontal Resolution: 650TVLLens 2.1mm : (M8) FOV160°Signal System: NTSC/PALS/N Ratio: 50dB (AGC OFF)Electronic Shutter Speed : AutoAuto Gain Control: AutoMin. Illumination: 0.1Lux@1.2FWDR: AutoDNR: AutoDay/Night: AutoPower: DC 3.3-5.5VWorking Current: 140mA@3.3V / 140mA@5.5VDimensions: L14mm*W14mm*H17mmNet Weight: 2.5g

    Review: Write a Review

    $19.99

    SKU:RCNC-P

    Weight: 0.10 kg

  • Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles Only
    Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles Only

    Skyzone SKY02S V+ 3D 5.8G 40CH FPV Goggles w/ VTX, 3D Camera, Head Tracking, HDMI, DVRThis is the latest version of Skyzone 3D 5.8G 40CH FPV goggles with VTX, 3D Camera, Head Tracking, HDMI and DVR that released in July 2016. Please take note that the option "Goggles Only" includes the goggles only without VTX and 3D camera.The new Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles are an upgrade of previous Skyzone 3D Goggles. These new goggles remain all the features of previous versions, including 3D/2D mode, built-in DVR with playback, head tracking, built-in front camera etc, and add some new features like HDMI-IN, channel auto searching, new eyeshade with headband for a more comfortable wearing.SKY02S V+ FPV goggles are built-in with two 5.8GHz receiving modules, two antenna ports and two independently-working display modules, bringing you 3D FPV flight experience (SCAM302 3D camera and STX202 two-way transmitters required). The two lens of the 3D camera work in the parallel manner so that 3D effect can be enhanced for close shot and reduced for long shot, bringing people an overall vivid visual experience.SKY02S V+ FPV goggles can also work in routine diversity reception mode. In such mode, it displays common 2D images. Its radio channel and band settings may be compatible with STX202 and other 5.8GHz transmitters, and in total it supports bands and 40 channels ( see the Specifications Description for details )These goggles come as an all in one package so you don’t have to worry about purchasing a set of goggles then needing to buy a receiver or even yet a dual diversity receiver system that adds much expense to the overall cost of goggles. These goggles even come with a built in DVR just add a micro SD card and you are good to go. Head Tracking? Yep! It’s included! No need to go out and buy an expensive tracker if that’s what your into. When comparing these goggles to other goggles there’s not much of a comparison. The others are just goggles. Skyzone Sky02S V+ are the whole package! Save some of they money you would spend on building another set of goggles and spend that savings on something that can fly! Features:-3D mode (SCAM302 3D camera and STX202 two-way transmitters required)-2D diversity mode-HDMI in-Channel auto searching-Dedicated eyeshade with headband for more comfortable wearing-Screen OSD-Built-in DVR with playback-Built-in 40CH 5.8G Diversity receiver with raceband, compatible with most FPV 5.8G transmitters on the market (Fatshark,DJI,Walkra,Boscam etc)-Built-in self-calibrating head tracking (gyro, inertial and compass)-Built in dual 854X480(WVGA) monitors, 1,229,760 color sub-pixels-Built-in external camera for surrounding view (640X480,VGA)-AV in/ AV out/ Earphone socket (with volume control)-Adjustable interpupillary and diopter for your eyes-Adjustable brightness and contrast-Complete plug and play kit                

    Review: Write a Review

    $450.99

    SKU:SKY02SS-P

    Weight: 0.90 kg

  • RunCam Micro Swift 2 FPV Camera
    RunCam Micro Swift 2 FPV Camera

    This is the new Micro Swift 2 from Runcam with some new features comparing to the 1st generation Runcam Micro Swift. One touch setting with 5 preset scenes, easy to switch the colors to suit your flying environment. No more headache to set with your OSD.  Low voltage alarm: The Micro Swift 2 comes with Vbat. You can change the voltage, or set a lowest voltage value. When the actual voltage is lower than what you set, it will warns you by changing the color.Parameters:Package:

    Review: Write a Review

    $34.90

    SKU:RCMS2

    Weight: 0.10 kg

  • RMILEC Multi-unity Signal Converter Signal Analyzer  V3
    RMILEC Multi-unity Signal Converter Signal Analyzer V3

    RMILEC Multi-unity Signal Converter Signal Analyzer V3This is the latest generation of RMILEC signal converter V3 which is able to convert PWM signal into PPM signal and SBUS signal, or convert two-way PPM signal into PWM signals and SBUS signals, or convert SUBS signal into PWM signal and two-way PPM signal.  It is used to debug UAV, robot and other equipment, accurately observes the control data of servos via computer.Features:Mode 1: PWM signal converted into PPM signal and sbus signal. PWM signal analyzes.Mode 2: Two-way PPM signals converted into PWM signals and sbus signals. Two-way PPM signal analyzes.Mode 3: SBUS signal converted into PWM signal and a two-way ppm signal. Sbus signal analyzes.Specifications : Size: 35.6 * 29 mmWeight: 8.5 gramsPrecision: 250 nanosecondsVoltage: 3.3-12V Support for reverse protectionConversion speed: Interrupt decoding without waiting after the signal is collectedpin header: 2.95 mm longitudinal spacing receiver pin header

    Review: Write a Review

    $15.99 $13.43, Save 16% OFF

    SKU:RSCV3

    Weight: 0.10 kg

  • FrSky XM 16 Ch Micro SBUS Receiver
    FrSky XM 16 Ch Micro SBUS Receiver

    Designed with space-saving and light weight in mind to fit into the smallest of drones, Frskys XM Micro Ultra-Light 16 Channel receiver may be the smallest of the FrSky range, but its no lightweight when it comes to performance!Boasting no less than 16 channels, failsafe and up to 600m range, the XM is compatible with FrSkys D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSkys operating systems can be at your fingertips.Features:Ultra-light receiver16 ChannelsFull rangeFirmware upgradeableRSSI outputD16 mode compatibleSpecs:Channels: 16Ch (S.Bus) (1-15ch for PWM,16ch RSSI for FC)Voltage: 3.5 ~ 10VOperating Current: 20mA @ 5VRange: <600mWith RSSI output on board: Analog 0~3.3VCompatibility: FrSky D16 modeNo telemetryDimension: 15 x 10 x 3.5mmWeight: 1gIncludes1 X FrSky XM Micro Receiver

    Review: Write a Review

    $9.90

    SKU:FSRXM

    Weight: 0.10 kg

  • Matek 5.8G 40CH 25/200/500mW Switchable Video Transmitter VTX-HV With BFCMS Control
    Matek 5.8G 40CH 25/200/500mW Switchable Video Transmitter VTX-HV With BFCMS Control

    Mateksys is expanding their product range and releasing their own video transmitters. The first one is Matek VTX-HV. It is separate half size of a normal FC, stackable board with OSD. ‘HV’ probably stands for High Voltage, as this VTX works directly from up to 6S HV LiPo battery. Has 5V output for camera, audio input, iPEX antenna connector, LED’s for channel band and power indication and traditional button control.Specifications & Features:Input voltage: 7~27V(2~6S LiPo)40 standard channels, A/B/E/F/R BandOutput Power: 25, 200, 500mW switchableBEC Output: 5V/1A for Camera or FCTraditional button+LED control of frequency and powerBFCMS (BFOSD & LUA Script) control via FC UART _TXFirmware upgradeablePower Consumption: 3.1W Max. @ 500mWVideo Input Impedance: 75 OhmAudio Subcarrier Frequency: 6.5 MHzRF Connector: U.FL (IPEX)Video Format: NTSC/PALWeight: 6g (Tx only, w/o SMA cable)Size: 36*22*6.5mm w/30.5mm mountingIncluded:5.8G Video transmitterIPEX to SMA Female, RG178 cable 10cmIPEX 5.8G whip antenna, RG178 10cmPVC Heat-shrink tube

    Review: Write a Review

    $29.90 $26.91, Save 10% OFF

    SKU:VTX-HV

    Weight: 0.10 kg

  • BattleRC 5.8G FPV Micro VTX Clover Antenna 70mm
    BattleRC 5.8G FPV Micro VTX Clover Antenna 70mm

    A new must for FPV. These are the 5.8G FPV Micro VTX Clover Antennas from Battle RC with VSWR less than 1.5. The "Clover Leaf" design of the antenna gives you great 360 degrees of FPV coverage. Every piece of the antenna has been strictly tested in and after production. Specifications:Impedance: 50ohmVSWR: <1.5Frequency: 5.72GHZ, 5.74GHZConnector: IPEX Weight: 2g±0.3Length: 70mmType: RHCP

    Review: Write a Review

    $6.98 $5.44, Save 22% OFF

    SKU:4LAIC

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.