Sorted:
  • Dragonfly Low Profile Micro FPV Camera
    Dragonfly Low Profile Micro FPV Camera

    This is the micro FPV camera that we are using on the hot selling X-Racer X-1. Using this high quality micro FPV camera, we have saved some much needed space for this design and we are able to place the camera in a low profile position between the two forward motors allowing for a design that does not require the video system being mounted in a high profile top mount of the aircraft.Specifications:CCD 1/4 CmosSignal System PAL NTSCPixel P:720H×576 N:720×487Photosensitive area 1/4:4.077mm x 3.136mm Scanning frequency H:15.625KHz V:50Hz H:15.7343KHz V:60HzHorizontal clarity 800 TV LinesShutter Speed 1/50-1/100000(秒) 1/60-1/100000(秒)Min. Illumination 0.1 Lux / F1.2S/N radio ≥48dB(AGC OFF)Grayscale 10Gamma value 0.45Black level 0.06 Vp-pVideo output 1.0Vp-p 75ΩPower Requirement DC3.3-5VWorking Temperature -20℃~50℃ RH95% MaxPower Consumption 90MA

    Review: Write a Review

    $14.99 $5.85, Save 61% OFF

    Time left: 0s

    SKU:FXRMC

    Weight: 0.10 kg

  • 6x15mm Coreless Motor for Blade Inductrix and Blade Nano QX (Speed: Fast)
    6x15mm Coreless Motor for Blade Inductrix and Blade Nano QX (Speed: Fast)

    These are powerful motors that works great in the Blade Inductrix, Blade Nano QX, Blade CPX/S. These motors come with plug and 6cm wire, they are better suited to FPV and will be the perfect upgrade for your Tiny conversion. If you are looking for punch and durability, you found it. Warning: These motors are too power hungry for the stock packs! You need strong batteries to run these motors at full performance. Suggest use 205mah mylipo pack, and they will deliver a lot of punch and maximum runtime.Warning: Applies only to the original Nano QX, without FPV. These motors will turn your Nano QX into an insane jaw-dropping pocket rocket, but it will not like hovering! Depending on the battery you use, you will see varying degrees of oscillations (wobble) during hover and slow flight in SAFE mode. Agility mode does not have this problem.Specifications:Speed: 14.000KvOperating voltage: 1.5-3.7VMax. thrust: 15g (direct drive)1.0A load current at 3.7V (direct drive)Lifetime rating: 5-6 hoursPlug: Micro-JST-1.25Clockwise: red +, blue -Counter clockwise: white +, black -Warning: To maximize performance and life span, please do not run them in reverse! Wire colors are reversed.Dimensions:Motor diameter: 6mmMotor length: 15mmShaft Diameter: 0.8mmShaft Length: 4mmWeight: 1.8g Wire length: 60mmPlease note: wire color coding is reversed from the stock motors. Blade has decided to code their motors differently to everyone else in the industry. If you take off, and your Inductrix or Nano QX spins in circles and yaws like a micro frisbee on steriods, please note wire colors are reversed. Your motors are installed in the wrong spots.

    Review: Write a Review

    $6.99 $2.69, Save $4.30 OFF

    Time left: 0s

    SKU:CL14M

    Weight: 0.10 kg

  • FPV Transmitting SMA Female Antenna  Extension Cables
    FPV Transmitting SMA Female Antenna Extension Cables

    FPV Transmitting SMA Female Antenna  Extension Cables. A simple extension cable for better placement of your antenna. Specifications:- Connector A: Straight - Connector B: Right Angle - Cable Length: 35mm (cable only)Note: This extension cables specially used for the Dragonfly 5.8G 40CH Mini TX 25mw/200mw.

    Review: Write a Review

    $1.99 $0.68, Save 66% OFF

    Time left: 0s

    SKU:DFTA

    Weight: 0.05 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.