Sorted:
  • Robotdog RD2205  Racing Motor 2300KV/2500KV
    Robotdog RD2205 Racing Motor 2300KV/2500KV

    RobotDog just dropped the newest line of RD2205 in 2 different KV ratings, 2300 and 2500, featuring a budget motor with reliability at a price tag of just $9.99.RobotDog has been continuously working hard on cost-effective products.The low price does not mean that the Robotdog motor is lacking power.The completely redesigned RD2205 is upgraded with features racing multirotors need. The motor is lighter and yields faster bell rotational response.Its perfectly designed as a budget motor for FPVers from beginners to intermediates.

    Review: Write a Review

    $9.99 $4.99, Save $5.00 OFF

    SKU:RD0523

    Weight: 0.10 kg

  • X-Racer X-1 F3 Flight Controller V2 with Frsky Rx and OSD Integrated
    X-Racer X-1 F3 Flight Controller V2 with Frsky Rx and OSD Integrated

    The X-Racer X-1 Whoop flight controller is making a return with an all new update. We are always listening to what our customers say and we have made some improvements accordingly. In reality, this is not just a simple whoop flight controller that was designed by us but its more of an FC that has been re-designed by users like you.This micro whoop brushed F3 flight controller was designed for X-Racer X-1, but it also can be used on those micro quadcopters like Tiny Whoop and Blade Inductrix.Features:1. The RX connection protocol has been upgraded from PPM to SBUS. With the SBUS protocol, you are able to get a faster response when the micro racer turn around.2. The integrated OSD (on screen display) is able to show some important flight data on your FPV feed, including battery voltage, current draw etc. You can even use it as a menu to change your quad’s PID, rates, filters and others.3. Larger MOS ensures a smoother flying with your micro racer. 4. The DC regulator module has been upgraded for a better loading capacity.5. Compatible with FrSky & SBUS, USB port ready.6. Pre-flashed with the latest Betaflight firmware.7. The binding buttons for the built-in Frsky RX have been updated, more convenient to use.How to Bind Built-in FrSky RX.1. Press "Band" to power on the quad, the middle red LED will turn on.2. Turn on your FrSky transmitter, set the mode to D8, 1-16CH, and then start to bind.3. After successfuly binding, on the right corner the red LED will start to slowly flash.4. Re-power on the flight controller, the binding is completed.How to Bind other RX.1. Connect the FC to Betaflight.2. Enter following instruction in CLI: set sbus_invention = on. And then save.3. The UART needs to choose 3.(Please take a note that the FC automatically works with the built-in FrSky RX, if you want to use with other RX, please set the CLI before using.)

    Review: Write a Review

    $29.99 $20.99, Save 30% OFF

    SKU:XR1FCU2

    Weight: 0.10 kg

  • BattleRC Micro 5.8G FPV VTX Antenna 60mm 3pcs
    BattleRC Micro 5.8G FPV VTX Antenna 60mm 3pcs

    Electrical Specifications:Frequency Range (MHz): 5100-5150/5750-5800Bandwidth (MHz): 50/50Input Impendence (Ω): 50V.S.W.R: ≤1.5Gain (dBi): 2.0Polarization Type: Vertical polarizationLightning Protection: DC groundingPower Capacity (w): 50Mechanical Specifications:Antenna Length (mm): 60MM±1MMRadiator: CuprumConnect Type: WeldingWorking Temp(℃): -40~60Storage Temperature(℃): -20~40Weight (g) :0.5±1

    Review: Write a Review

    $7.50 $2.25, Save 70% OFF

    SKU:3FMQA

    Weight: 0.10 kg

  • GemFan 2035BN 4-Blade Propellers Purple / CCW + CW
    GemFan 2035BN 4-Blade Propellers Purple / CCW + CW

    These fantastic Gemfan 2035BN 4 blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.Specification- Type : Micro Class Multi-Rotor- Length : 2"- Pitch : 3.5"- Weight : 0.7 g - Mounting hole : 1.5mm Motor Shaft or T-type mount, Two Holes (eye to eye 5mm)- Hub : 5mm- Included : 2pcs CW and 2pcs CCW in a bag

    Review: Write a Review

    $1.90 $0.95, Save 50% OFF

    SKU:GF2035

    Weight: 0.10 kg

  • 4 Ports 1S Lipo Charger With XT60 Plug for X-Racer X-1
    4 Ports 1S Lipo Charger With XT60 Plug for X-Racer X-1

    FPVModel 4 Port 1s Lipo ChargerThe little lipo charger is specially designed for the little lipo batteries with 2.0 plug, like the ones used on X-Racer X-1, Tiny whoop and other micro racer. 3-6s input, switchable between high voltage and low voltage charging modes.An the 1s lipos usually only last for 3 to 5 minutes during the flying. It would be better if you have several extra batteries ready. But for an ordinary USB charger, it is just able to charge one lipo each time. With the this new 1s lipo charger, we are now able to charge four 1s lipos at once.Features:1. Input Voltage: 3-6S2. Two charging modes: Normal charging of 4.2v or High voltage charging 4.35V3. Charging time: 30 Min.4. Excellent heat dissipation5. Stable charging status to guarantee the full charge of lipos.

    Review: Write a Review

    $17.98 $4.99, Save $12.99 OFF

    SKU:XRX1BC

    Weight: 0.10 kg

  • EZlap Timing System
    EZlap Timing System

    X-Racer X-1 Racing with EZlap Timing System The EZlap timing system is a race management system that specially designed for both indoor and outdoor small scale drone racing. This new FPV race tracker allows 4 pilots to race at once. The EZlap timing system comes with a master controller, 3 infrared receiver modules, 8 transmitters. The system is powered by a PC or laptop via a USB cable connecting to the USB port of master controller. It is easy to install, simply mount the master controller and receiver modules in the racing gate, install the transmitters in the racing drones, then install the free RCM Beginner software (can be downloaded at the bottom of this page) in your computer and connect with the provided USB cable, you and your friends will be able to start the racing just in a minute.The master controller sends the signals that received from the infrared receiver modules to the computer after processing.The infrared transmitter is 0.4g only, it will not increase any weight to the racing drone since it is so light in weight. It has 8 different address codes which are switchable via the 3-digit DIP switch. Start to send the address codes after powering on via USB.The infrared receiver modules receive the address codes from the transmitters and send them to master controller.Connection and Use:The master controller is powered by the USB after connecting to the PC. No extra power supplies required.The receiver modules and master controller are connected with three special made 6-pin plug cables. In the EZlap timing kit there are 4 receiver modules (including the master controller) included. But how many modules you need depending on your track width and the height of your bridge. The quantity of receiver modules is also limited by the USB loading capacity.The infrared transmitter is powered by the built-in button cell battery.Connect the master controller to the PC with the provided USB cable, access to the free RCM Beginners software and set the pilots information.Package Inlcuded:Master controller x 1 (similar to receiver module but with a USB port)Receiver module x 3 Transmitter for racing quad x 816cm 6-pin plug camble x 33m long USB cable x 1Downloads:RCM Beginners (Free Software)RCM Beginners User ManualThe master controller is powered by the USB after connecting to the PC. No extra power supplies required. It sends the signals that received from the receiver modules to the RCM Beginners software after processing.The receiver modules are connected by 6-pin plug cables. They receive the address codes from the transmitters and send them to master controller.The infrared transmitter is 0.4g only, it will not increase any weight to the racing quad since it is so light in weight . It has 8 different address codes which are switchable via the 3-digit DIP switch. Start to send the address codes after powering on via USB.Three 16cm 6-pin plug cables are included to connect the receiver modules and master controller.The 3m USB cable is used for connecting the master controller to the PC. All the parts included in the EZlap timing system.Management interface of RCM Beginners.The EZlap timing system is working during the racing.

    Review: Write a Review

    $99.00 $29.90, Save $69.10 OFF

    SKU:FCTR

    Weight: 0.25 kg

  • Dragonfly 25mw 48CH Micro VTX For X-Racer X-1/ KL-EX90
    Dragonfly 25mw 48CH Micro VTX For X-Racer X-1/ KL-EX90

    FPVModel did not stop at the flight controller design. We have also designed a Dragonfly 25mw 48ch Vtx to mount flushly on top of the FC and give and even more aero dynamic low profile design for the video transmission. By using this low profile design were able to streamline the body of the X-Racer X-1 and allow for smooth airflow over the low slung canopy, allowing for smooth airflow over the top of the frame.

    Review: Write a Review

    $15.99 $5.99, Save $10.00 OFF

    SKU:GFVX1

    Weight: 0.10 kg

  • 60-core Large Current Y Servo Extension Cord With Anti-Interference Magnetic Ring 30cm/60cm
    60-core Large Current Y Servo Extension Cord With Anti-Interference Magnetic Ring 30cm/60cm

    specially designed for uav FPV,flexible and good quality,with the magnetic ring you can minimize the interference,make suer your flight safety.Length: 60cm,30cmConnector: compatible with Futaba & JRQuantity: 1 pcs

    Review: Write a Review

    $4.49 $1.35, Save 70% OFF

    SKU:YSEWMR30

    Weight: 0.01 kg

  • 12 in 1 Wireless RC Simulator PHoenix RC 4.0/RealFlight G5 G4/VRC/Reflex XTR/AeroFly/FMS
    12 in 1 Wireless RC Simulator PHoenix RC 4.0/RealFlight G5 G4/VRC/Reflex XTR/AeroFly/FMS

    Last one in stock!! Hurry Up!!The unbelievable price only for US waerhouse.Support the following software:- RealFlight G3 /G4 /G5- PhoenixRC v1.0, v2.0, v3.0 (Automatically update)- PhoenixRC v4.0.k (Only for Windows 7)- Reflex XTR v5.03- AeroFly Professional Deluxe v1.9Specifications:- Color: Red.- Weight: 9g.- Support USB HID1.1 /2.0.Package Included:-  Wireless USB dongle-  USB extension cable-  Audio cable (3.5mm jack to jack plug)-  Servo cable-  DVD discs

    Review: Write a Review

    $15.80 $7.90, Save $7.90 OFF

    SKU:WLFSL

    Weight: 0.20 kg

  • Universal Spirit Level for Gimbal Debugging
    Universal Spirit Level for Gimbal Debugging

    Size:58*44*13mmHigh accuracy and durable.Specially designed for gimbal to debug and test,or make anyother things keep in level.Two colors:black and red,delivery at random.

    Review: Write a Review

    $2.90 $0.87, Save 70% OFF

    SKU:TSL

    Weight: 0.10 kg

  • T-plug Connector Deans Style Male and Female Connectors 5 pair
    T-plug Connector Deans Style Male and Female Connectors 5 pair

    Designed for RC model battery plug soldering,good quality.Quantity:5 pair

    Review: Write a Review

    $2.50 $1.25, Save 50% OFF

    SKU:5T-PLUG

    Weight: 0.10 kg

  • SunnySky X2820 kv920/kv800 motor
    SunnySky X2820 kv920/kv800 motor

    SunnySky X2820 kv800/920. Model:X2820-920KVKV (rpm/v): 920Non-load current: 10V/1.8AWeight: 140g Diameter: 35mmLength: 58.5mm/ 40mm (with shaft/ without motor shaft)Motor Shaft Diameter(mm): 5Prop adaptor output shaft diameter: 6mmX2820 KV800    Testing Data (for reference only):    Propeller TypeVoltageCurrentThrust(G)Power(W)G/W RatioEMP12x610V21.6A1.52kg2167.03 11V24.8A1.68kg272.86.15 12V28.1A2.0kg337.25.93 13V31A2.18kg4035.4 14V34.2A2.5kg478.85.22 14.8V37.1A2.83kg549.085.15JXF13x6 Wood10V26.5A1.64kg2656.18 11V29.7A2.02kg326.76.18 12V33.9A2.25kg406.85.53 13V37.4A2.49kg486.25.12 14V40.5A2.7kg5674.76 14.8V44.3A3.0kg655.644.57XDL14x8 Wood7.4V23.8A1.3kg176.127.38 8.5V28.3A1.58kg240.556.56 10V34.5A1.95kg3455.65 10.5V36A2.08kg3785.5 11.1V38A2.25kg421.85.33EMP14x77.4V22A1.3kg162.87.98 8.5V26.5A1.6kg225.257.1 10V31.5A1.98kg3156.28 10.5V33.8A2.1kg354.95.91 11.1V36.4A2.28kg404.045.64                  X2820 KV920    Testing Data (for reference only):    Propeller TypeVoltageCurrentThrust(G)Power(W)G/W RatioEMP14x77.4V30A1.53kg2226.89 8.5V35.2A1.85kg299.26.18 9V38.1A1.97kg342.95.74 9.5V41A2.1kg389.55.39 10V44A2.25kg4405.11 10.5V47.2A2.42kg495.64.88 11V49.5A2.6kg544.54.77XDL14x8 Wood7.4V32.9A1.48kg243.466.07 8.5V38A1.83kg3235.66 9V40.5A1.92kg364.55.26 9.5V42.1A2.05kg399.955.12 10V45A2.2kg4504.88 10.5V48.6A2.34kg510.34.58 11V51.7A2.54kg568.74.46JXF13x6 Wood7.4V25.6A1.35kg189.447.12 8.5V30.3A1.55kg257.556.01 10V36.7A1.96kg3675.34 11V41.8A2.25kg459.84.89 12V46.2A2.56kg554.44.61 13V50.7A2.87kg659.14.35 14V55A3.1kg7704.02 14.8V59.5A3.32kg880.63.77EMP12x610V31.2A1.78kg3125.7 11V34.8A2.06kg382.85.38 12V39.8A2.32kg477.64.85 13V44A2.6kg5724.54 14V48.5A2.8kg6794.12 14.8V52A3.12kg769.64.05            X2820 KV1100    Testing Data (for reference only):    Propeller TypeVoltageCurrentThrust(G)Power(W)G/W RatioJXF13x6 Wood7.4V37A1.6kg273.85.84 8.5V43.7A1.96kg371.455.27 9V50A2.18kg4504.84 10V54.1A2.55kg5414.71 10.5V58.2A2.72kg611.14.45 11V62A2.85kg6824.17EMP12x67.4V31.2A1.5kg230.886.49 8.5V35.7A1.74kg303.455.73 9.5V42A2.1kg3995.26 10V46.5A2.32kg4654.98 10.5V48.9A2.52kg513.454.9 11V52.1A2.65kg573.14.62EMP11x5.510V32.6A1.72kg3265.27 11V37A2.0kg4074.91 12V42.8A2.28kg513.64.43 13V46.4A2.65kg603.24.39 14V52A2.9kg7283.98 14.8V56.6A3.15kg837.683.76

    Review: Write a Review

    $45.00 $19.90, Save $25.10 OFF

    SKU:S2820-92

    Weight: 0.20 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.